Technical Presentations

Optimization of Control Parameters of Grid-Connected PV System in EMTP845

Abstract
It is observed that the controller gain parameters of the PV model have a significant impact on the PV plant’s response during the fault recovery and the PV plant’s interaction with the rest of th... see moree system in general. Manual tuning of the PV park parameter considering multiple fault and contingency scenarios is a time-consuming task and might even be impossible. Optimization techniques such as particle swarm optimization (PSO) can be used to optimize the gain parameters considering fault/ contingency scenarios. The presentation will talk about the implementation of PSO in EMTP using javascript to optimize PV park controller gain parameters.

Tag(s): pv plant, ibr, pso, optimization, scripting, pll, inverter control, inverter based resources, DER

Design and Performance Assessment of Harmonic Filters Using EMTP835

Abstract
In order to permit access to a public electricity network, a network operator will impose compliance with certain technical requirements, which must be met by the potential network user seeking the co... see morennection to the network.
These technical requirements are typically quite extensive and detailed and generally include requirements for compliance with power quality standards, including harmonic distortion standards. As a result of the requirement to comply with harmonic distortion standards and the requirements therein, it is sometimes necessary to provide harmonic filtering in order to ensure the public network will remain within the required harmonic distortion limits under all normal operating conditions.
This presentation gives a study case for a connection to a 400kV network which required design and installation of a number of filters in order to ensure compliance with the harmonic distortion limits on the public network.
As part of the assessment and design process, a number of studies was undertaken in order to ensure all aspects of the filter system design perform as required, under all operating conditions. These studies included:
• harmonic propagation and distortion calculations,
• filter configuration and optimisation studies,
• filter loading studies,
• filter transient studies,
• filter protection studies.


The tool used in the assessments was EMTP. The presentation will demonstrate certain aspects of the EMTP capability and use in steady state and electromagnetic transient studies applied to the filter system design, validation and compliance studies.

Tag(s): railway, traction, power quality, harmonics, scripting

Performing Large-Scale System Studies with the Assistance of Scripting in EMTP-R585

Abstract